Zoeller 820-0011 Features:
Constructed out of cast iron with stainless steel lifting handle, screws, and bolts
Cutter and disc made of a hardened stainless steel
Powder coated epoxy finish protects against corrosion
Automatic reset thermal overload protection
Cutters protected from abrasive solids
Legs allow for free standing installation
Zoeller 820-0011 Specifications:
Flow Rate: 45 gallons per minute
Motor: 2 hp (horsepower)
Voltage: 230
Phase: Single Phase
Amps: 14.5
RPM: 3450
Additional Zoeller Links
View the Manufacturer Warranty
Zoeller The Shark Collection
Warranty and Product Information
| Approved for Commercial Use | No |
| Country Of Origin | USA |
| Collection | Model 820 |
| Manufacturer Warranty | 3 Years |
| Made in America | Yes |
| CARB approved | No |
Dimensions and Measurements
| Height | 18.625 in. |
| Flow Rate (GPM) | 46 |
| Cord Length | 20 in. |
| Discharge Diameter | 1.25 in. |
| Inside Diameter | 4 in. |
| Maximum Head Height | 107 in. |
Characteristics and Features
| Thermostat | Traditional |
| Switch Type | On / Off |
| Electric Start | Yes |
| Housing Material | Cast Iron |
| Impeller Material | Plastic |
| Material Casing | Cast Iron |
| Material Housing | Iron |
| Material Shaft | Stainless Steel |
| Submersible | Yes |
Electrical and Operational Information
| Voltage | 230 |
| Amperage | 14.5 |
| Horsepower | 2 |
| Electrical Phases | 1 |
| Cooling System | Liquid Cooled |
| Maximum Fluid Temperature | 130 °F |
| Motor RPM | 3450 |
| RPM | 3450 |
Included Components
| Blades Included | Yes |
| Built-In Check Valve | Yes |
